Product Description
- 【2 Seconds Quick Detect Water Content of Brake Fluid】The brake fluid tester can measure the water content in the brake fluid in 2 seconds to determine whether the brake fluid needs to be replaced. It helps you do regularly brake fluid check, make sure you drive in safety condition.
- 【Highly Sensitive Sensor&250MM Free Bend Stainless Steel Probe Brake Fluid Tester】The probe of brake fluid tester adopts highly sensitive sensor, which can quickly and sensitively measure the water content, and the measurement is more stable. The probe is covered with chromed surface, can be resistant to oils and oxidation. Equipped with 250mm goose neck probe provides flexibility of detection.
- 【9 Colorful LED Indicators of Brake Fluid Tester】3 LED lights show selected brake fluid types and 6 LED lights in different colors show percentages of water content in the brake fluid. Green light indicates the detection is normal, Yellow light reminds you to change the brake fluid, and Red light warns you to change the brake fluid immediately for safety. You can clear the test result at a glance.
- 【Universal fit for DOT3/DOT4/DOT5.1 Brake Fluid Detection&Reinforced Material】The brake fluid tester can support 3 brake oil type detection, detect DOT3/DOT4/DOT5.1 brake fluid. Universal fit for most vehicles. This brake fluid tester is made of high-grade materials, the arc corners won’t scratched your hand, providing comfortable touching. Reinforced material against falling, sturdy and durable, which greatly increases the service life.
- 【Buzzer and Light Dual Alarm Brake Fluid Tester】When the brake oil moisture content is detected, the LED indicator will lights up. The brake fluid tester will emit a “beep”alarm when the water content exceeds 3% of the red light. The alarm is loud and stereoscopic, allowing you to easily measure even in noisy environments.
Why We Must Have -- Brake pressure was transmitted by brake fluid, the pressure transmission will out of function once brake fluid including too much water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition.
Operation Manual:
1. Install one 9V(6F22) battery at the back of tester.
2. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding, which indicates the product self-test is successful.
3. Press SELECT button, it will locate DOT3 model automatically.
4. Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs.
5. Immerse the probe into brake fluid and you will get different colors of LED lights, they indicate:
Green Light: indicates the brake fluid water content is below 1%
The First Yellow Light: indicates the brake fluid water content is approximately 1.5%
The Second Yellow Light: indicates the brake fluid water content is approximately 2.5%
The First Red Light: indicates the brake fluid water content is approximately 3%
The Second Red Light: indicates the brake fluid water content is more than 4%
6. Press POWER button to turn off the tester.
Selling points are as follows：
HD backlight dual display
Support backlight display glare and easy reading day and night
Attention Please:
Because items with batteries can not be shipped by post air mail, the package does not include battery.
Note:
1. After use, please clean the probe and avoid any retention of stains that might affect the test.
2. If in use for a long time, best to remove all batteries and store in a dry place at normal room temperature.