Physen Wireless Waterproof Door Chime Door Bell System

Physen Wireless Waterproof Door Chime Door Bell System
  • Wireless Doorbell Kit with 2 Push Buttons and 3 Receivers
  • 52 Different Chimes&4 Volume Levels-Much Louder
  • Operating Distance Up to 300M Range
  • IP55 Waterproof Transmitter
Product Code: HB-0920
Brand: Physen
Warranty: 7 Days Checking Warranty, Void if Burnt or Damaged
Availability: Out of Stock
Price Updated On: 13 Mar, 2019
Rs. 2,499
You save Rs. 1,000 (29% Off)
Shipping & Delivery
Shipping Cost: Rs. 200/Unit
Shipping in Hyderabad - Rs. 200.00, Islamabad - Rs. 200.00, Lahore - Rs. 200.00
Free Shipping (Karachi only)
  • ?Wireless Doorbell Kit with 2 Push Buttons and 3 Receivers?-Simple Design and High Quality Doorbell,Widely Used in Home,Store,Office,Apartments,Villas,Garden,etc.
  • ?52 Different Chimes&4 Volume Levels-Much Louder?-4 Adjustable Volume Levels from 30dB to 110dB to suit your different needs;52 different Chimes allow you to change the ring tones freely.And you can also set your favourite ring tone for the specific door button, then you can know which door someone is visiting.
  • ?Operating Distance Up to 300M Range?-The Operating Range between Transmitter and Receiver is up to 300 meters(1000 feet) in open area.Which ensures that you will never miss any visitors even if you are in a big house with several rooms.
  • ?IP55 Waterproof Transmitter?-The Waterproof Transmitter can be used in indoor or outdoor and there is a message box at the bottom, it allows to leave a message when you are not at home.
  • ?Easy to Install?-No Need Batteries for Receivers,Just plug the Receiver into the electrical outlet is OK.And Push button can be fixed on the door frame with screws,or attached double-sided adhesive tapes.Quality guaranteed,all our doorbell passed the CE,RoHS,FCC Certified.

    Product description

    Voltage of Plug-in Receiver: AC 220V(UK/EU)
    Transmitter working voltage:≤12V
    Sound Volume: 25-100dB, 4 levels
    Working frequency:433.92MHZ
    Wireless distance:1000 feet in open air
    Working temperature: -30?-70?

    Please use high quality alkaline batteries, poor batteries will reduce the maximum operating range
    Please do not install transmitter on metal doors since metal is not easy to transmit the signal

    Easy Installation,No requirement for wiring
    Just plug receivers into the electrical outlet (no batteries required for main receiver) and use double sided adhesive or screws to install the push button.

    Pairing Instruction
    Push button is freely match with receiver and vice versa.
    You can program each transmitter creates a different tone in the receiver or each receiver sets their tones separately.
    1)Long press music control button for about 10s until receiver "ding" with LED flashes to clear receiver memory;
    2)Press 'music' to switch required music for different transmitters;
    3)After you choose the music then long press receiver volume button about 5-7 seconds until you can hear receiver "ding" and the blue light will be flash.
    4)when the blue light flashing you should "immediately" press transmitter to pair with receiver.
    You will hear the tune you selected, which means that your operation is completed successfully.
    Then on this receiver to select another song for the back door and do the same way make it pair with a new one transmitter.

    2*double-sided adhesive tape
    1*user manual

No Specifications Found