12VDC motors standard , flow:1100 gallons / hour or 5000 L / hour, Amp Max: 3.2A , outlet orifice: 29 mm/ 1-1/8″, Dimension : 114x95 (4.5x3.75)
Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure, Typically used in boat hulls / bilges
Pumps reliable high quality. Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life.
Electrical Characteristics : Runs continuously Submarine pond with Cabling 6" (1.8m) standard Body pumps high strength nylon Snap-mounting of the pump on the swivel base Protected against overheating and comply with the requirements flameproof. ISO8849
Attention : Can not be used to pump oil - otherwise the pump will not work. Removal and transfer of water: ---feel it ---pumps ---dishes showers ---spare time ---Industries ---All the little use and decanting
1 * Bilge Pump 1 * Manual
The Amarine-made submersible bilge pumps are tough enough for any bilge.
High Flow: for use from 22-234L / Min (1.32-14.04 cubic meters / hour)
Small size, high efficiency, low current (low cost switching power supply supporting); to achieve a small size perfect combination of high flow
Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition
Impact resistant ABS housing.
Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies
Totally submersible and ignition protected.
To all existing safety standards.
Water cooled motors for long life, with anti airlock design and moisture tight seals.
Snap-lock strainer base for easy installation and removal and silent vibration free running.
No burn out if runs dry.